Datasheet
Technical Data Sheet & Product Specifications of S355J2+N Pipes
Our premium structural sections are engineered for high-performance load-bearing and pressure
transmission networks, providing custom Wall Thicknesses (WT) and Outside Diameters (OD) built
for severe mechanical environments.
S355J2+N Seamless Pipes Pricing
Our automated, large-scale production setup allows us to optimize
manufacturing costs and provide highly competitive wholesale rates. Refer to our latest cost indicator
chart below:
PRICING
| Product Description & Parameters |
Pricing and Specifications Data |
| Base Price |
₹ 88/Kg |
| Primary Standard |
EN 10210-1 & EN 10219-1 |
| Product Grade |
S355J2+N (Normalized Structural Steel) |
| Available Tubing Types |
Seamless, ERW, Welded, Fabricated |
| Outside Diameter Range |
21.3 mm to 457.2 mm |
| Standard Delivery Length |
6 Meters (Custom cut lengths available) |
Please Note: The prices listed above serve as an industry
baseline. Actual steel pipe costs vary depending on current market raw material rates, custom wall
thickness specifications, and ordered volume.
Specifications of EN 10210 S355J2+N Pipes
Choosing this normalized fine-grain chemistry guarantees outstanding
performance under cyclic dynamic loading. The steel is fully killed during manufacturing to maximize
uniformity, eliminate hidden micro-voids, and provide excellent field weldability without pre-heating.
S355J2+N Chemical Composition
The chemical balance ensures excellent weldability and uniform grain
refinement following the normalization heat treatment.
| Element |
Material Percentage Breakdown (Maximum) |
| Carbon (C) |
0.22% Maximum |
| Silicon (Si) |
0.55% Maximum |
| Manganese (Mn) |
1.60% Maximum |
| Phosphorus (P) |
0.035% Maximum |
| Sulphur (S) |
0.035% Maximum |
| Iron (Fe) |
Balance |
S355J2+N Mechanical Properties
The normalization heat treatment optimizes the structural lattice,
providing robust yield values and exceptional low-temperature durability.
| Mechanical Property |
Metric Target Value |
| Minimum Yield Strength (ReH) |
315 to 355 MPa Minimum |
| Tensile Strength (Rm) |
490 to 630 MPa |
| Minimum Elongation (A5) |
22% Minimum |
| Low-Temp Charpy V-Notch Impact Test |
Minimum 27 Joules at -20°C |
Technical Material Information
SHEET 03
| Technical Parameter |
Standard Value & Equivalents |
| S355J2+N Density |
7.85 g/cm³ |
| DIN Equivalent Grade |
DIN 17100 St 52-3 N (Germany) |
| ASTM Equivalent Grade |
ASTM A572 Grade 50 (USA) |
| JIS Equivalent Grade |
JIS G3106 SM490B (Japan) |
Dimensional Standard, Size Range, and Schedule
Chart
Our structural production lines execute precision forming across various
cross-sections, offering tight tolerance controls over corner radii and internal concentricity.
Dimensional & Manufacturing Parameters
SHEET 04
| Specification Parameter |
Available Range & Standards |
| Available Pipe Profiles |
Round (Circular Hollow Sections), Square, and Rectangular Hollow Sections |
| Manufacturing Methods |
Hot-Finished Seamless, Hot-Finished Welded, Electric Resistance Welded (ERW) |
| Wall Thickness (WT) |
1.8 mm up to 14.27 mm |
| Standard Pipe Lengths |
6 Meters, 12 Meters, or precise cut-to-length options up to 18 Meters |
| Governing Specifications |
EN 10210-1, EN 10219-1, DIN 17100 |
| Exterior Surface Finishes |
Bare/Oiled, Shot Blasting, Black Paint, Mirror Polish, Galvanized, and
Anti-Corrosive coatings |
| Tubing End Configurations |
Plain End (mechanically sheared/mill-cut), Beveled End, Screwed, and Threaded |
